How To Install Bird Mesh On Solar Panels

Many Australian homes and business owners have installed solar panels on their roofs in recent years to take advantage of regime incentives in the course of subsidies and rebates. This has immune many homeowners to utilise their roof as a power generating source in the form of solar free energy.

However with any new evolution there comes unforeseen challenges. Solar panel installations on house roofs create platonic nesting locations for urban pest birds, especially pigeons. Solar panels offer shade and protection for the birds. Unfortunately this tin can result in costly impairment to the solar panels and reduced efficiency. Pigeons tin can damage exposed wiring under solar panels, eolith debris that eat into the surface of the panels besides as blocking sunlight that tin reduce overall efficiency. In addition, leaves, twigs and other nesting materials can accrue under solar panels reducing airflow which again reduces efficiency and can pb to damage from overheating.

WHAT'S THE SOLUTION?

Fortunately we have a solution - Solar Panel Bird Mesh Kits. These are DIY (Do information technology yourself) kits that can hands exist installed by any home or business organisation owner. The Solar Console Bird Mesh Kits consist of a 30 metre roll of galvanised UV PVC coated mesh that attaches to the outer edge of the solar panels using specially designed fasteners. These fasteners prune onto the underside of the panel framework pregnant there is no demand for drilling into the panels equally this may void your warranty.

Once the mesh has been installed to the entire perimeter of the solar panels, pigeons, rodents, leaves and other debris will exist blocked from gathering underneath. Thus reducing ongoing cleaning and maintenance costs.

How to install Solar Console Bird Mesh Kit

What you will need:

• Ladder
• Wire Cutters / Snips
• Pliers
• Work Gloves
• 30m Roll of Black UV PVC Coated Wire Mesh
• 100pk Solar Panel Mesh Fasteners

1.Fold end of solar panel mesh roll to 45 degrees

 2.Fit fastener cap to stop of fastener claw

3.Start at 1 corner of the solar panel array. Concord the wire mesh to the corner of the panel level with the superlative of the panel framework. Insert the fastener claw through the mesh with claw facing upwards and connect to the underside of the console framework.

4.Concur the end of the fastener with i hand or pliers and slide the fastener cap until holding the mesh tight against the console frame.

5. Constrict tail of hook into slot on fastener cap to terminate.Repeat this process and work your way around the panel installing a fastener approximately every 30cm.

6.Fold the mesh corners over and under each other to finish the corners

For inside corners information technology is suggested that the mesh be cut to halfway up from the bottom to allow the mesh to exist folded to shape.

For rails and switch gear you lot volition need to cut windows or flaps to so that you tin mold the mesh around.

Remember to take all proper precautions when working at heights such as the use of safety gear i.e a harness. If you don't have the proper safety gear or the access is difficult we recommend using the services of a professional installer.

Source: https://www.antibirdspikes.com.au/blogs/news/how-to-install-solar-panel-bird-mesh

Posted by: findleyshers1937.blogspot.com

Share this post